BENDIX BW2920 manual Outboard Tire Inboard Tire, Inch LF Field Range Valve Stem

6.Using the SmarTire® TPMS Maintenance Hand Tool, go to the first tire to be programmed and proceed to activate each of the trailer’s tire pressure sensors in the proper order. Starting on the left side (road side) of the trailer at the forward axle, begin by activating the inner tire and proceed to work counterclockwise from inner to outer tire. Work in a U-shaped pattern around the trailer ending with the right side (curb side) forward outer tire. If using wide-based single tires, simply start at the forward left side tire and work in a U-Shaped pattern around the trailer ending with the right side forward tire. Some examples are shown below:

Figure 28

7.To activate the tire pressure sensor, hold the SmarTire Maintenance Hand Tool’s antenna against the tire’s upper sidewall in-line with the valve stem. Press the Learn Button to learn the ID code of the sensor. In most cases, the Maintenance Hand Tool is able to receive signals from the inner tire on the dual tire configuration as well. To program the inner tire, hold the tool in line with the circumferential position of the valve stem of the inner wheel, as indicated below:

Outboard Tire	Inboard Tire
	Sensor
22-24 inch LF
Field Range	Valve Stem

Figure 29 - Initiating Transmissions From Dual Wheels

If the sensor is not programmed from this position, you many also place the tool between the dual tire assemblies and activate the sensor by placing the antenna near the tire sidewall, in-line with the inner valve stem. Pressing

the button will abort the Walk-Around Learn procedure.

31