BenQ M300 user manual Service Center No, Bearer Mode, Validity Period

Models: M300

1 138
Download 138 pages 13.42 Kb
Page 66
Image 66

Service Center No.

This feature allows you to save the message center's phone number for sending your messages. The messages that you send are sent to recipients through this message center.

Enter the message number provided by the network vendor.

After you are finished, press to confirm.

Bearer Mode

This can be set according to whether you are using a GPRS network system or a regular GSM dialup network. If you are using a GPRS network, you can use both the GPRS and dialup network to send and receive SMS messages. If however you are using a dialup network, you are restricted to using only the dialup network for sending and receiving SMS messages.

GPRS: Use only the GPRS network to send and receive SMS messages.

CSD: Use only the dialup network to send and receive SMS messages.

GPRS Preferred: Use the GPRS network preferentially. Only if there is no GPRS network present will the dialup network be used.

CSD Preferred: Use the dialup network preferentially. Only if there is no GPRS network will the GPRS network be used.

Validity Period

This sets the duration that an undeliverable SMS message that you send can be stored at the message center. During this period, the message center will continue to attempt to deliver the message to the designated number.

52Using Your Phone

Page 66
Image 66
BenQ M300 user manual Service Center No, Bearer Mode, Validity Period