BenQ S700 user manual Stopwatch, Countdown Timer, Press to halt the stopwatch

Stopwatch

1.Press to start the stopwatch.

2.While the stopwatch is running, you can press (Record) to save up nine elapsed times (such as in a race).

Pressing (Back) or while the stopwatch is running will stop and reset the stopwatch, and then take you back to the Tools menu.

3.Press to halt the stopwatch.

4.Once the stopwatch is halted, you can press to move the cursor to the elapsed time you want to check. Additionally, after the watch stops running, you can compare the differences of the other elapsed times against a particular elapsed time which is used as the comparison base.

To do so, use to move the cursor to the lap time you want to use as

the base, and then press (Comp) to list the time differences against the base.

5.To resume the stopwatch, press .

6.Press (Reset) to zero the stopwatch.

Countdown Timer

1.Press (Set) to enter the amount of time to count down. You can set any time up to 59 minutes and 59 seconds.

2.Press and the timer starts counting down to zero. You can then use the timer in the same way with the stopwatch.

142Menus