Selecting an input source
The projector can be connected to multiple equipment at the same time. When the projector is first turned on, it will attempt to reconnect with the input source which was in use when the projector was last shut down.
To select the video source:
•Using the remote control or projector
Press one of the Source keys on the remote control, or press SOURCE on the projector repeatedly until your desired signal is selected.
•Using the OSD menu
1.Press MENU on the projector or MENU/EXIT on the remote control, and then press 
/ 
until the System Setup menu is highlighted.
2.Press 
to highlight Input Source and press ENTER. The source selection bar is displayed.
3.Press 
/
repeatedly until your desired signal is selected and press
ENTER.
Once detected, the selected source information will be displayed on the screen for seconds. If there are multiple pieces of equipment connected to the projector, you can go back to the source selection bar again to search for other signals.
•If you want the projector to automatically search for the signals, select On in the System Setup > Auto Source Search menu.
•If you want to use the PIP function, see "Displaying more than one image source simultaneously" on page 40 for details.
System Setup
Language | English |
Splash Screen | BenQ |
Projector Position | Floor Front |
Auto Off | Disable |
Sleep Timer | Disable |
Background Color | Blue |
Menu Settings |
|
Input Source | ENTER |
Auto Source Search | On |
Closed Caption |
|
Standby Monitor Out | Off |
EXIT Back |
HDMI | NOTE: When | |
| automatically | |
Video | searching for a valid | |
input source, the | ||
| projector cycles | |
Component 1 | through the | |
Component 2 | available signals | |
following the | ||
| ||
PC | sequence from top | |
| to bottom as the | |
| source selection bar | |
| shows. |
English
Changing Color Space
In the unlikely event that you connect the projector to a DVD player via the projector's HDMI input and the projected picture displays wrong colors, please change the color space to YUV.
1.Press MENU/EXIT and then press 
/ 
until the Display menu is highlighted.
2.Press 
to highlight Color Space Conversion and press 
/ 
to select a suitable color space.
This function is only available when the HDMI input port is in use.
Using the projector | 21 |
