BenQ SP890 user manual On-Screen Display OSD menus, On-Screen Display OSD structure

English

On-Screen Display (OSD) menus

On-Screen Display (OSD) structure

Please note that the on-screen display (OSD) menus vary according to the signal type selected.

Main menu	Sub-menu		Options
	Picture Mode	Cinema/Dynamic/Presentation/sRGB/User 1/User 2
	Load Settings From
	Brightness		0–100
Picture --	Contrast		0–100
	Color		0–100
Basic
	Tint		-20–+20
	Sharpness		0–8
	Reset Picture Settings
	Rename User Mode
	Black Level		0 IRE/7.5 IRE
		Noise Reduction	0/1/2/3
	Clarity Control	Detail Enhancement	0-5
		Luma Transmission	0/1/2
		Chroma Transmission	0/1/2
	Color Temperature		T1/T2/T3/T4/User 1/User 2/User 3
		Red Gain	0–100
		Green Gain	0–100
	Color Temperature	Blue Gain	0–100
Picture --	User_ Fine Tuning	Red Offset	0–100
Advanced		Green Offset	0–100
		Blue Offset	0–100
	Gamma Selection		1-8
	Brilliant Color		On/Off
		Primary Color	Red/Yellow/Green/Cyan/Blue/Magenta
	Color Management
		Range	0–100
		Saturation	0–100
	Film Mode		On/Off
	3D Comb Filter		On/Off
	Dynamic Black		On/Off

42 Using the projector