BenQ SP890 Language, Splash Screen, Projector Position, Auto Off, Sleep Timer, Background Color

System Setup menu		English
Function	Description
Language	Sets the language for the On-Screen Display (OSD) menus. See "Using the
	menus" on page 22 for details.
Splash Screen	Allows you to select which logo screen will be displayed during projector start-
	up. You can choose BenQ logo screen, Blue screen or Black screen.
Projector Position	The projector can be installed on a ceiling or behind a screen, or with one or
	more mirrors. See "Choosing a location" on page 12 for details.
Auto Off	Prevents unnecessary projection when no signal is detected for a long time. See
	"Setting Auto Off" on page 51 for details.
Sleep Timer	Sets the auto-shutdown timer. The timer can be set to a value between 30
	minutes and 3 hours.
Background Color	Allows you to choose the color of the background screen that will be displayed
	when there is no input source detected.
	Menu Display Time
	Sets the length of time the OSD will remain active after your last key press. The
	range is from 5 to 30 seconds in 5-second increments.
Menu Settings	Menu Position
	Sets the On-Screen Display (OSD) menu position.
	Reminder Message
	Sets whether to display the OSD messages about the status of detecting signals.
Input Source	Selects an input source to be projected. See "Selecting an input source" on
	page 21 for details.
Auto Source Search	Sets whether the projector searches automatically for input sources. If the source
	scan is On, the projector will scan for input sources until it acquires a signal. If
	the function is not activated, the projector selects the last used input source.
	Closed Caption Enable
	Activates the function by selecting On when the selected input signal carries
	closed captions.
	• Captions: An on-screen display of the dialogue, narration, and sound effects
Closed Caption	of TV programs and videos that are closed captioned (usually marked as
	"CC" in TV listings).
	Caption Version
	Selects a preferred closed captioning mode. To view captions, select CC1, CC2,
	CC3, or CC4 (CC1 displays captions in the primary language in your area).
	These functions are only available when the Video or S-Video signal
	is selected.
	Selecting On enables the function. The projector can output a VGA signal when
Standby Monitor Out	it is in standby mode and the PC jack is correctly connected to devices. See
	"Connecting a monitor" on page 19 for how to make the connection.
	Enabling this function slightly increases the standby power consumption.

Using the projector 47