Hiding the image
In order to draw the audience's full attention to the presenter, you can use BLANK on the remote control to hide the screen image. The word "BLANK" appears in the corner of the screen while the image is hidden. When this function is activated with an audio input connected, the audio can still be heard.
You can set the blank time in the Display > Blank Timer menu to let the projector return the image automatically after a period of time when there is no action taken on the blank screen. The length of time can be set from 5 to 30 minutes in
If the preset time spans are not suitable for your personation, select
Disable.
No matter Blank Timer is activated or not, you can press any key on the projector or remote control to restore the picture.
Once BLANK is pressed, the projector lamp enters Economic mode automatically.
Freezing the image
Press FREEZE on the remote control to freeze the image. The word
"FREEZE" will be displayed in the upper left corner of the screen. To release the function, press any key on the projector or remote control.
Even if an image is frozen on the screen, the pictures are running on the video or other device. If the connected devices have active audio output, you will still hear the audio even though the image is frozen onscreen.
Utilizing FAQ function
The Information menu contains possible solutions to problems regarding image quality, installation, special feature operation and service information.
To get the FAQ information:
1.Press MENU on the projector or MENU/EXIT on the remote control to open the OSD menu and press
/ 
to highlight the Information menu.
2.Press 
to select
3.Press ENTER.
4.Press 
/
to select a problem and press ENTER for possible solutions.
5.To leave and save the settings, press MENU on the projector or MENU/EXIT on the remote control.
English
Using the projector | 35 |
