BenQ SP890 user manual Advanced Setup menu

English

Advanced Setup menu

Function	Description
	Lamp Power
	Selects the projector lamp power between Normal and Economic modes.
	Reset Lamp Timer
Lamp Settings	Once the lamp is renewed, select Reset to return the lamp timer to "0". See
	"Resetting the lamp timer" on page 54 for details.
	Equivalent Lamp Hour
	Shows the lamp hour information. See "Getting to know the lamp hour" on
	page 51 for details.
	Selects an input source type for the HDMI signal. Auto is the default and
HDMI Settings	recommended setting. You can also manually select the source type. The
	different source types carry different standards for the brightness level.
	This function is only available when the HDMI signal is selected.
Baud Rate	Selects a baud rate that is identical with your computer’s so that you can connect
	the projector using a suitable RS-232 cable and update or download the
	projector’s firmware. This function is intended for qualified service personnel.
	Press ENTER to display the grid test pattern. It helps you adjust the image size
Test Pattern	and focus and check that the projected image is free of distortion.
	The function is only available when the projector detects no input
	signal.
High Altitude Mode	A mode for operation in areas like high altitude or high temperature. See
	"Operating in a high altitude environment" on page 39 for details.
Audio Settings	See "Adjusting the sound" on page 36 for details.
	Password
	Limits use of the projector to only those who know the correct password. See
Password	"Utilizing the password function" on page 23 for details.
	Change Password
	You will be asked to enter the current password before changing to a new one.
	See "Utilizing the password function" on page 23 for details.
Lan Control Settings	See "Controlling the projector through a Lan environment" on page 37 for
	details.
	Returns all settings to the factory preset values.
Reset All Settings	The following settings will still remain: names of user modes,
	Keystone, Language, Projector Position, High Altitude Mode,
	Password, and Expert Mode.
Direct Power On	Sets whether to turn the projector directly on without pressing the II POWER
	key on the projector or remote control when the projector is plugged in.
	The Expert Mode menu is password protected and only accessible by authorized
	calibrators. The ISF (Imaging Science Foundation) has developed carefully
	crafted, industry-recognized standards for optimal video performance and has
Expert Mode	implemented a training program for technicians and installers to use these
	standards to obtain optimal picture quality from BenQ video display devices.
	Accordingly, we recommend that setup and calibration be performed by an ISF
	certified installation technician.
	For more information, please go to www.imagingscience.com or
	contact the place you purchased the projector.

48 Using the projector