Advanced picture quality controls
There are more advanced functions in the Picture
Setting Black Level
Highlight Black Level in the Picture 
/ 
on the projector or remote control to select 0 IRE or 7.5 IRE.
The grayscale video signal is measured in IRE units. In some areas which use NTSC TV standard, the grayscale is measured from 7.5 IRE (black) to 100 IRE (white); however, in other areas where PAL equipment or Japanese NTSC standards are used, the grayscale is measured from 0 IRE (black) to 100 IRE (white). We suggest that you check the input source to see if it is with 0 IRE or 7.5 IRE, then select accordingly.
Controlling image clarity
You may have static or noisy projected pictures.
To achieve better picture clarity:
1.Highlight Clarity Control in the Picture
2. Press 
/
to select the item you want and press 
/ 
to set the desired value.
•Noise Reduction: Reduces electrical image noise caused by different media players. The higher the setting, the less the noise.
•Detail Enhancement: Sharpens the image. The higher the setting, the more details the image reveals.
Setting a preferred color temperature
To set a preferred color temperature:
1.Highlight Color Temperature in the Picture 
/ 
on the projector or remote control.
2.Highlight Color Temperature Fine Tuning in the Picture
3. Press 
/
to highlight the item you want to change and adjust the values by pressing 
/ 
.
•Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red, Green, and Blue.
•Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of Red, Green, and Blue.
4.To save and leave the settings, press MENU/EXIT.
