11. Replace the lamp cover on the projector.
2 
12. Tighten the screw that secures the lamp cover.
• Loose screw may cause a bad connection, which could result in malfunction.
• Do not over tighten the screw.
13. Connect the power and restart the projector.
Resetting the lamp timer
1 
Do not reset the lamp timer if the lamp has not been replaced as this could cause damage.
14.After the 
/ 
until the Advanced Setup menu is highlighted.
15.Press 
to highlight Lamp Settings and press MODE/ENTER. The Lamp Settings page displays.
16.Highlight Reset Lamp Timer and press MODE/ENTER. A warning message displays asking if you want to reset the lamp timer. Highlight Reset and press MODE/ENTER. The lamp time will be reset to "0".
