Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker(s). Be sure you have made a correct connection to the projector audio input. See "Connecting with video equipment" on page 19 for how the audio input is connected.
Muting the sound
To temporarily turn off the sound:
1. Press MENU/EXIT and then press 
/ 
until the Audio Setup menu is highlighted.
2. Press 
to highlight Mute and press 
/ 
to select On.
If available, you can also press MUTE on the remote control to toggle projector audio between on and off.
Adjusting the sound level
To adjust the sound level, press 
/ 
on the projector or remote control, or:
1.Repeat step 1 above.
2.Press 
to highlight Volume and press 
/ 
to select a desired sound level.
Switching the left/right audio channels
1.Repeat step 1 above.
2.Press 
to highlight L/R Switch and press 
/ 
to select On to swap audio output of the left and right speakers, or select Auto to automatically swap the left and right audio channels when the projection direction is changed.
Turning off the Power On/Off Ring Tone
To turn off the ring tone:
1.Repeat step 1 above.
2.Press 
to highlight Power On/Off Ring Tone and press 
/ 
to select Off.
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or changing the sound level will not affect the Power On/Off Ring Tone.
Important safety instructions | 35 |
