40 Connecting with video equipment
Picture -- Basic menuPicture -- Advanced menu
Function Description
Preset Mode
Pre-defined picture modes are provided so you can optimize your projector
picture set-up to suit your program type. See "Selecting a preset mode" on
page 26 for details.
Load Settings From
Selects a preset mode that most suits your need for the picture quality and
further fine-tune the picture based on the selections listed below. See "Setting
the User 1/User 2/User 3 mode" on page 27 for details.
Brightness Adjusts the brightness of the picture. See "Adjusting Brightness" on page 28 for
details.
Contrast Adjusts the degree of difference between dark and light in the picture. See
"Adjusting Contrast" on page 28 for details.
Color Adjusts the color saturation level -- the amount of each color in a video
picture. See "Adjusting Color" on page 28 for details.
Tint Adjusts the red and green color tones of the picture. See "Adjusting Tint" on
page 28 for details.
Sharpness Adjusts the picture to make it look sharper or softer. See "Adjusting Sharpness"
on page 28 for details.
Flesh Tone See "Adjusting Flesh Tone" on page28 for details.
Reset Picture Settings
Returns all settings in the Picture -- Basic and Picture -- Advanced menus
to the factory preset values. See "Resetting the picture mode" on page27 for
details.
Function Description
Black Level Sets the picture grayscale as 0 IRE or 7.5 IRE. See "Setting Black Level" on
page 29 for details.
Clarity Control Adjusts the picture clarity. See "Controlling image clarity" on page 29 for
details.
Color Temperature There are several color temperature settings available. See "Selecting a color
temperature*" on page 29 for details.
Color Temperature
Fine Tuning See "Setting a preferred color temperature" on page 30 for details.
Gamma Selection See "Selecting a Gamma setting" on page 30 for details.
Brilliant Color See "Adjusting Brilliant Color" on page 30 for details.
Color Management See "Color Management" on page 31 for details.
Film Mode See "Setting Film Mode" on page 32 for details.
3D Comb Filter See "Setting 3D Comb Filter" on page 32 for details.
Dynamic Black Automatically changes the black level of the projected pictures to enhance the
effect of contrast ratio.