Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the
Equivalent lamp hour
=1 (hours used in Economic mode) + 3/2 (hours used in Normal mode)
See "Setting Lamp Power as Economic" below for more information on Economic mode.
To obtain the lamp hour information:
1.Press MENU and then press 
/ 
until the Advanced Setup menu is highlighted.
2.Press 
to highlight Lamp Settings and press ENTER. The Lamp Settings page displays.
3.The lamp hour information is shown in the row of Equivalent Lamp Hour.
4.To leave the menu, press MENU.
Advanced Setup
Lamp Settings | ENTER |
HDMI Settings |
|
Baud Rate | 115200 |
Test Pattern |
|
High Altitude Mode | Off |
Password |
|
Key Lock | Off |
Reset All Settings |
|
ISF |
|
Back | |
Lamp Settings |
|
|
|
Lamp Power | Economic |
Reset Lamp Timer |
|
Equivalent Lamp Hour | 50 |
| Back |
Extending lamp life
The projection lamp is a consumable item. To keep the lamp life as long as possible, you can do the following settings via the OSD menu.
•Setting Lamp Power as Economic
Using Economic mode reduces system noise and power consumption. If the Economic mode is selected, the light output will be reduced and result in darker projected pictures.
Setting the projector in Economic mode also extends the lamp life. To set Economic mode, go to the Advanced Setup > Lamp Settings > Lamp Power menu and press 
/ 
.
•Setting Auto Off
This function allows the projector to turn off automatically if no input source is detected after a set period of time.
To set Auto Off, go to the System Setup > Auto Off menu and press 
/ 
to select a time period. The time period can be set from 5 to 30
minutes in
System Setup
Language | English |
Splash Screen | BenQ |
Projector Position | Front Table |
Auto Off | Disable |
Sleep Timer | Disable |
Menu Settings |
|
Input Source |
|
Auto Source Search | On |
Back |
Connecting with video equipment | 45 |
