39
Connecting with video equipment

Note that the menu items are available when the projector detects at least one valid signal. If there is no

equipment connected to the projector or no signal detected, limited menu items are accessible.

Display
Frame Interpolation Off/Low/Middle/High
3D
3D Mode Auto/Off/On
3D Format Frame Sequential/Frame Packing/Top-
Bottom/Side-by-Side
3D Sync Invert Disable/Invert
System Setup
Language
Splash Screen BenQ/Black/Blue
Projector Position Front Table/Front Ceiling/Rear Table/Rear
Ceiling
Auto Off Disable/5 min/10 min/15 min/20 min/25 min/
30 min
Sleep Timer Disable/30 min/60 min/90 min/120 min/150
min/180 min
Menu Settings
Menu Display Time 5 sec/10 sec/15 sec/20 sec/25 sec/30 sec/
Always On
Menu Position Center/Top-Left/Top-Right/Bottom-Right/
Bottom-Left
Input Source HDMI 1/HDMI 2/Video/S-Video/Component
1/Component 2/PC
Auto Source Search On/Off
Advanced Setup
Lamp Settings
Lamp Power Normal/Economic
Reset Lamp Timer
Equivalent Lamp Hour
HDMI Settings HDMI Format
Auto
PC Signal
Video Signal
Baud Rate 2400/4800/9600/19200/38400/57600/115200
Test Pattern
High Altitude Mode On/Off
Password Change Password
Power On Lock On/Off (inputs current password)
Key Lock
Reset All Settings
ISF (inputs current password)
Information
Source
Preset Mode
Resolution
Equivalent Lamp Hour
Firmware Version