BenQ Z2 manual Recorder, Auto scanning for a channel, Presetting a channel

Auto scanning for a channel

Push and hold the Joystick to the right or left for two seconds and the phone will start the auto scan to locate an available channel.

Presetting a channel

When a preferred channel is located, press (Option) and select Save to save this channel to the My Channels list.

Listening to a preset channel

There are two ways to listen to a preset channel:

1.From the FM Radio screen, push the Joystick up or down to locate a preset channel.

2.Press (Option) and then select My Channels. Scroll to your preferred channel and then press the Joystick button (OK).

Listening to the Radio using the Loud Speaker

Press (Option) and then select Loud Speaker.

The handsfree headset must remain connected to the phone even if the Loud Speaker is turned on.

Recorder

For information on using the Recorder function, see page 41, "Using the Recorder Function".

Menus 91