BenQ Z2 manual Listening to Voicemails, Voice Dialing, Long-press

Listening to Voicemails

Long-press to dial the voicemail phone number and listen to your

voicemails.

If the network vendor supports it, the voicemail icon will appear on the display when you have new voicemails.

If the voicemail number is not stored in the memory, you will not be

able to access your voicemail by long-pressing . In this case, you will need to manually set the number by going to Messages > Voicemail > Set Number.

Voice Dialing

1.In the idle mode, push the joystick up and hold.

2.After a beep, when the display shows "Recording…", say the voice dialing prompt for the number you wish to dial. Once the phone has correctly identified the contact associated with this voice dialing prompt, two situations may occur:

a.If there is only one phone number identified, your phone will automatically dial this number.

b.If there are two or more phone numbers stored for the contact

identified, scroll to the number you wish to dial, and press to make the call.

To use voice dialing to make a call, you must have already stored a voice dialing prompt for the desired number in Phone Book. For details, see page 31, "Adding Contacts to the Phone Book".

26Using Your Phone