BenQ Z2 manual PIN1 Code, PIN2 Code, Phone Lock, SIM Lock, Used to change the PIN2 code

PIN1 Code

Used to activate, deactivate or change the PIN1 Code.

To activate the PIN1 Code, select Set Status and set to On, then enter the PIN1 Code.

Select Change Password to change the PIN1 Code.

PIN2 Code

Used to change the PIN2 code.

Phone Lock

Once the phone lock is activated, you will be required to enter the phone code when the phone is turned on. You must enter the correct code to unlock it (the default phone code is 1234). When the phone is locked, you will only be able to make emergency calls.

SIM Lock

Using this feature, you can prevent unauthorized persons from using your phone with other SIM cards. After you activate the SIM Lock, only the SIM card present when the feature was activated will be accepted by the phone. If a new SIM card is inserted in the phone, entry of the SIM Lock code will be requested as you turn the phone on (there is no limit on the number of attempts to enter the SIM Lock code).

If the code is entered correctly, the phone will be able to recognize the new SIM card and use it normally. The next time the phone is turned on with this SIM card inserted, the phone will not ask again for you to enter the SIM Lock code.

Menus 121