WAP Messages

When you receive a new WAP message, will be shown on the display. This option will start up the browser so you can read the WAP message.

Goto URL

Allows you to link to the URL you enter.

WAP Settings

Allows you to configure settings for different network operators' WAP servers, and then select the desired server to get online.

1.Scroll to the desired server and press (Option).

2.Select Edit to configure the server's settings as follows:

Profile Name

Gives the WAP server a name.

Homepage

Sets the homepage that the browser will link to when it is started up.

IP Address

Enter the IP address used for accessing the mobile Internet.

Port

Enter the connection port specified by the network operator.

NAP

If you are using a GPRS network, choose to configure GPRS NAP settings or CSD NAP settings and select either type of settings to get online.

If, however, you are using a dialup network, you are restricted to configuring only the CSD NAP settings to connect to the Internet.

Menus 109

Page 125
Image 125
BenQ Z2 manual WAP Messages, Goto URL, WAP Settings