Bearer Mode

This can be set according to whether you are using a GPRS network system or a regular GSM dialup network. If you are using a GPRS network, you can use both the GPRS and dialup network to send and receive SMS messages. If you are using a dialup network, you are restricted to using only the dialup network for sending and receiving SMS messages.

You need to ask the network operator whether your network supports sending SMS over GPRS.

GPRS

Use only the GPRS network to send and receive SMS messages.

GPRS/CSD

Use the GPRS network preferentially. Only if there is no GPRS network present will the dialup network be used.

CSD

Use only the dialup network to send and receive SMS messages.

CSD/GPRS

Use the dialup network preferentially. Only if there is no GPRS network will the GPRS network be used.

Expiry

This sets the duration that an undeliverable SMS message that you send can be stored at the message center. During this period, the message center will continue to attempt to deliver the message to the designated number.

Each operator has its own maximum expiry time setting.

Using Your Phone

65

Page 81
Image 81
BenQ Z2 manual Bearer Mode, Expiry, Use only the Gprs network to send and receive SMS messages