Manuals / Bertazzoni / Kitchen Appliance / Range

Bertazzoni X)486GPIRVI, X)486GPIRX, X)486GPIRBI, X)486GPIRVE, X)486GPIRBL Installing The Backguard

Models: X)486GPIRRO (A X)486GPIRCR X)486GPIRGI X)486GPIRNE X)486GPIRBL X)486GPIRVE X)486GPIRBI X)486GPIRVI X)486GPIRX

1 52
Download 52 pages 13.1 Kb
Page 11
Image 11
INSTALLING THE BACKGUARD

INSTALLING THE BACKGUARD

The back guard must be installed prior to operation of the appliance for appropriate ventilation of the oven compartment.

The supplied back guard is a 2‐part assembly. The box also contains a set of metal screws for securing the back guard to the worktop.

Disassemble the back guard and position the front part on the worktop. Align the screw holes with the corresponding holes at the back of the worktop.

If the holes are not aligned, partially loosen the brackets at the back of the worktop as shown below.

Install the front part of the back guard by tightening the 2 central screws from the top and

2 lateral screws from the bottom.

11

Page 10 Page 12
Page 11
Image 11
Bertazzoni X)486GPIRVI, X)486GPIRX, X)486GPIRBI, X)486GPIRVE, X)486GPIRBL, X)486GPIRNE, X)486GPIRGI, (A Installing The Backguard
Page 10 Page 12