TIPS FOR USING PANS CORRECTLY
ATTENTION!
Always ensure that bottom and handles of pans
do not protrude from the worktop.
When cooking with flammable fat such as oil, do
not leave the range unattended.
Use pots of the appropriate size on each burner following the indication of the diagram below.
Burner | Recommended pan size |
| inches (mm) |
|
|
Small | 3½”‐51/2”(90 – 140) |
|
|
Medium | 51/2”‐ 101/4”(140 – 260) |
|
|
Large | 71/8”‐ 101/4” (180 – 260) |
|
|
Dual burner | 82/3”‐101/4” (220 – 260) |
|
|
When boiling liquids, turn the knob to the MINIMUM position once boiling is reached to avoid overflow. .
Always use pots with matching lid.
Dry the bottom of pans before operation.
Use pots with a flat, thick bottom (except for wok cooking).
WOK COOKING: always use the wok adapter supplied with the range. Wok pan external diameter shall not be smaller than 10” (25cm) and larger than 16” (40cm).
SIMMERING: use the simmer ring supplied with the range.
USING THE ELECTRIC GRIDDLE
WARNING
The griddle element is hot after use. Allow sufficient time for griddle components cool before cleaning.
The electric griddle element is rated 240 volts AC 1100 watts.
SEASONING THE GRIDDLE
Before using the griddle for the first time, it must be seasoned.
If the griddle has not been used for a period of time, it should be reseasoned.
To season the gridlle:
1.clean the griddle thoroughly with hot, soapy water to remove any protective coating.
2.rinse with a mixture of 1 quart water and 1 cup white vinegar. Dry thoroughly.
3.Pour 1 teaspoon vegetable oil into the center of the griddle. Do not use corn oil as it gets sticky. Rub the oil over the entire surface of the griddle using a heavy cloth.
4.Turn the control knob to a maximum setting
(7). Turn the heat off when the oil begins to smoke. Allow the griddle to cool.
5.Repeat step 3. Be sure to cover the entiresurface with the oil
6.Repeat step 4. Allow the griddle to cool. Wipe the entire surface of the griddle using a heavy cloth. Apply a very thin layer of vegetable oil. The griddle is now ready to use.
Use
Press and turn the knob anti‐clockwise to the selected position
(**)
(**)The operating symbols are silk‐printed on the knobs
28
