Black & Decker BDPS200 instruction manual Figure K3. Refer to figures C & C1

• Unscrew the lid from the side of the canister and properly dispose of cleaning solution.

• Refill the canister with a small amount of new cleaning solution (figure K1). Screw lid securely on canister.

• Plug in the cord and spray the cleaning solution through the sprayer onto scrap material for 5 seconds (figure K2).

• Unplug the sprayer from the power source.

• Properly dispose of cleaning solution.

• Remove the spray nozzle, by turning counterclockwise, then remove the atomizer

(figure K3). Refer to figures C & C1.

• Unscrew the canister from the sprayer by turning the collar as shown in figure K4. Remove the pickup tube and filter and o-ring from the sprayer. Clean the parts with the cleaning brush in the appropriate cleaning solution.

• Remove the front housing of the sprayer, by pressing down on the release button and pulling the front housing off of the sprayer (figure K5, K6).

• Remove the piston and spring (figure K7).

11