ALIGNINGTHE PICKUPTUBE -
(FIGURESF1 ANDF2)
The pickup tube can bea ligned in the
direction that you will be doing the most
spraying to help minimize the amount of
times thatyou will have to refill the canister.
• Ifyou are spraying at an upward angle or
straight on, position the pickup tube
(figureF1) towa rd the back of the canister.
•Ifyou are spraying at a downward angle,
position the pickup tube (figureF2)toward
the front ofthe ca nister.
This will ensure you spray as much material
as possible before you need to refill.
OPTIONALSETUP USINGDIRECTTO CANHOSE- BDPS600ONLY• Unscrew the canister from the sprayer by
turning the collar as shown in figureGand
remove the pickup tube and filter
(figureG1).
• Push the suction hose onto the intake and
return ports as shown.
(figureG2).
• Pull the hose apart on the opposite end
and slide the larger hose completely through
the container clip, then over the barbs of the
pickup tube and filter as shown in figureG3.
• Place the suction tube assembly into the
material container and attach the container
clip securely to the side (figureG4).Check
to make sure thatcomp lete assembly is
submerged in the material container.
9
G
G2 G3
G4
G1
F1 F2