Black Box AC401A, AC400A manual Installation

CHAPTER 3: Installation

3.1.1CABLES

Three cables are supplied with the Projection Panel:

1.A Macintosh II/Macintosh LC/Apple IIGS loop-through cable

2.A VGA/MCGA loop-through cable

3.A loop-through cable for EGA, CGA, or Macintosh video

The cables that come with your Projection Panel are used to connect the computer’s video port to the Projection Panel and the monitor. Each of the three cables has a 26-pin connector for the Projection Panel, a connector matching the video card and a connector for the monitor. The Projection Panel receives the computer’s signals, amplifies the signals, and sends them out to the monitor.

15-pin MacII 15-pin VGA 9-pin VGA

Fig. 3-2. Cables.

9