APPENDIX: Maintenance

8-Pin Jack Replacement

These connectors need to be replaced only when connections no longer permit a secure-tight connection or when connectors are damaged. In standard use, however, these connectors shouldn’t ever need to be replaced. Follow these steps and see Figure A-2.

1.Remove the five screws from the Test Set back cover.

2.Gently lift off the back cover to expose the inside of the unit. Remove the damaged connector(s) as indicated in Figure A-2.

3.Secure the new jack connector to the Test Set as indicated in Figure A-2.

4.Replace the back cover and retaining screws.

PULL CONNECTOR(S)

STRAIGHT OUT OF SOCKET

RJ-45 JACKS

FRONT PORTION OF BRTS-100

WITH BACK COVER REMOVED

Figure A-2. Replacing the 8-Pin Jack Connector(s).

43

Page 44
Image 44
Black Box BRTS-100 manual Pin Jack Replacement, Figure A-2. Replacing the 8-Pin Jack Connectors