G-Converter Chassis
Appendix C - EMC Requirements
To ensure compliance with the EMC directive, some care must be taken to ensure that the units are installed properly, using suitable screened cables and connections. The following must be observed:
This product relies on the use of screened cables for connection to the 9 Way
The diagram below illustrates an example of a suitable screen connection. Note how the foil or braid screen is bent back over the 'C' clip to achieve a pressure contact of the screen against the shell:
It is important to keep the screen to shell connection as short as possible.
10
Description | Type At Connector | RJ45 Socket |
|
|
|
|
|
|
TxP | Output | 1 |
|
|
|
TxN | Output | 2 |
|
|
|
RxP | Input | 3 |
|
|
|
RxN | Input | 6 |
|
|
|
34 
SALES: 0118 965 5100
