G-Converter Chassis
TECHNICAL: 0118 931 2233
Introduction This manual provides information covering installation and set-up procedures of the G-
Converter Card Cage System.
Accommodation within the Card Cage System is provided for up to 18 Channel Cards; 1
Manager Card; and 2 Power Supplies. All cards may be ‘hot swapped’. The Card Cage
System is normally supplied with a single 40W 230V AC Power Supply Module. Additional
Power Supply Modules can be supplied to meet specific requirements.
Overview
The Card Cage System, manufactured from extruded aluminium, comprises 21 slots, within a
19-inch, 3U enclosure. A PCB back plane, which provides interconnection between the
front and rear sections of the Channel cards, is located towards the back of the enclosure.
Channel connection is achieved by simply plugging the appropriate front and rear sections
into the back plane.