Global Preferences
The Global Preferences menu contains a collection of settings that affect various aspects of operation.
SERVSWITCH WIZARD DVI DL
Global Preferences |
|
Mouse Switching: | ENABLED |
OSD Colour: | SCHEME 1 |
Default Mode: | ALL |
Reminder Banner: | ENABLED |
OSD Dwell Time: | 2 SECONDS |
|
|
| |
To get here
1Press 
(hotkeys can change).
2Press 
to select ‘More menus’.
3Select ‘Global Preferences’.
®
Mouse Switching
Settings: ENABLED, DISABLED
The computer channel can be switched using a three button mouse or IntelliMouse. Pressing the central button or wheel button together with the left hand mouse button will cause the unit to switch to the next available computer. When mouse switching is enabled the central mouse button or wheel mouse button is allocated to control the Wizard DVI DL and is not therefore available for use by computer applications. If you want to use the central mouse button within your applications you will need to disable mouse switching. The rotation action of an IntelliMouse wheel is not affected and is always available to the computer application.
OSD Colour
Settings: SCHEME 1, SCHEME 2, SCHEME 3, SCHEME 4
As you toggle between these options you will see the color of the menu change to show the selected scheme. The menu schemes have been specially chosen to provide a high contrast with the colors that you would normally see on a computer screen. This setting also affects the color of the reminder banner.
Default Mode
Settings: ALL, KVM + SPK, KVM ONLY, SPK ONLY, USB1 ONLY, USB2 ONLY
Determines which peripheral switching mode should be offered as standard. Regardless of the default mode that is set, during use you can always change the switching mode using either the TAB key (in the
Reminder Banner
Settings: ENABLED, DISABLED
When the reminder banner is enabled, the name of the currently selected computer will appear in a small reminder banner which is displayed for a momentary period defined by the ’OSD Dwell Time’ setting.
OSD Dwell Time
Settings: 1, 2, 3, 5 SECONDS
After a successful computer channel change, the unit will display a confirmation message for a few seconds. The length of time that this confirmation message dwells on the screen may be changed.
22
