CHAPTER 3: Installation
2.If you haven’t already done so, follow the hardware-installation instructions in Section 3.1. After connecting the USB cable, the Add New Hardware Wizard should appear. Click “Next.”
3.Select “Search for the best driver for your device” and click “Next.”
4.Select “Specify a location” and type in “X:\Win98” (where “X” is the drive letter of your CD-ROM drive). Then click “Next.”
5.Confirm that Windows is pointing to X:\Win98 (where “X” is the drive letter of your CD-ROM drive). Click “Next.” Windows will then copy over the driver files.
6.Click “Finish” to complete the driver installation.
After installing the drivers, Windows will detect your USB Director RS-232’s new COM ports and will begin to initialize them. Installation is complete when no more dialog boxes appear. Your new communication ports, numbered sequentially following the existing ports in your system, are now ready.
