DVD OPERATION

Note:

The television standard can also be switched using the remote con- trol. Press the TV-Modebutton E repeatedly until the desired televi- sion standard is displayed.

Switching playback control on/off

If the Playback Control (PBC) function is switched off, the titles and chapters of a VCD/SVCD are played in ascend- ing order. With PBC on, the VCD/ SVCD is played with the predefined menus and in logical order.

The setting for PBC is located under

ÒPBCÓ.

Selecting the playback language

You can preselect the preferred play- back language of the DVD. If the se- lected language is available on the DVD, the playback starts with the pre- set language.

The setting of the playback language is performed under the ÒAudioÓ menu item.

Selecting the language of subtitles

You can preselect the preferred lan- guage for subtitles. If the selected lan- guage for subtitles is available on the DVD, the subtitles are displayed in the preset language.

The setting of the subtitles is performed under the ÒSubtitleÓ menu item.

Selecting the language for the DVD menu

You can preselect the preferred lan- guage for the menus of the DVD. If the selected language for menus is avail- able on the DVD, the menus of the DVD are displayed in the preset language.

The setting of the language for the DVD menu is performed in the ÒDisc MenuÓ menu item.

Parental control

You can secure the device against un- authorised use by assigning a pass- word. In addition, you can specify a rating level.

Rating level means that some DVDs are equipped with a code that de- fines the age-appropriate release.

If you set a rating level that is lower than the one found on the inserted DVD, it can be played only after enter- ing the password.

Note:

Not all DVDs support the Rating Level function.

In the menu you can define which mov- ies can be played. These ratings follow the recommendations of the Motion Pic- ture Association of America (MPAA).

34

Page 34
Image 34
Blaupunkt DVD35 operating instructions Switching playback control on/off, Setting for PBC is located under