DVD OPERATION

Playing a DVD with a different region code is not possible.

This device can be used to play the following data carriers/data formats:

DVD video and DVD audio. DVD-MP3/WMA.

Video CD (VCD).

MP3/WMA CDs, see the chapter ÒMP3/WMA modeÓ.

Audio CDs, see the chapter ÒCD modeÓ.

License

Manufactured under license of Dolby Laboratories. ÒDolbyÓ, ÒPro LogicÓ and the double-D symbol are trademarks of Dolby Laboratories.

This product contains technologies that are copyright-protected under certain US-American patents. The copyrights are property of Macrovision Corpora- tion and other copyright owners. The use of this copyright-protected technol- ogy must be approved by Macrovision Corporation and is intended exclusively for private use and other presentations in a limited scope, unless Macrovision Corporation first issued a respective permission.

Switching to DVD mode

If there is no DVD inserted in the drive,

switch on the device by pressing button 1.

Press the button 2.

The control panel opens.

Gently insert the DVD with its printed side pointing up into the drive until you feel some resist- ance.

The drive draws in the DVD automati- cally.

You must not hinder or assist the drive as it draws in the DVD.

Gently close the control panel whilst exerting a little pressure un- til you feel it click into place.

The DVD data are loaded.

Dependent upon the inserted DVD, the playback starts or the DVD menu dis- plays.

If a DVD is already inserted in the drive,

press the SRC button ;on the device or the SOURCE button ; on the remote control repeatedly until ÒDVDÓ appears on the display.

Playback begins from the point at which it was last interrupted.

22

Page 22
Image 22
Blaupunkt DVD35 License, Switching to DVD mode, Playing a DVD with a different region code is not possible