EXTERNAL AUDIO SOURCES
External audio sources
In addition to the CD changer, you can also connect another external audio source equipped with a line output. If no CD changer is connected to the device, you can connect two external audio sources. Audio sources can, for example, be portable CD players, Mi- niDisc players or MP3 players.
The AUX input must be activated in the menu.
An adapter cable is needed to connect an external audio source instead of a CD changer. You can obtain this cable (Blaupunkt no.: 7 607 897 093) from your authorised Blaupunkt dealer.
Information about where to connect an audio source to the AUX2 input can be found in the installation instructions.
Switching the AUX input on/off
➮Press the MENU¥OK button 7.
➮Press the 
or 
button 6 repeatedly until ÒAUX MENUÓ appears on the display.
➮Press the MENU¥OK button 7.
➮Repeatedly press the 
or 
but- ton 6until ÒAUX2Ó or ÒAUX1Ó appears on the display.
If a CD changer is connected, ÒAUX1Ó is not available.
➮Use the 
buttons 6to switch between the ÒONÓ and ÒOFFÓ op- tions.
When you have finished making your changes,
➮press the MENU¥OK button 7 and then the DIS¥ESC button 5 to exit the menu.
Note:
If the AUX input is switched on, you can select it by pressing the SRC button ;.
ENGLISH FRAN‚AIS ESPA„OL PORTUGUæS
61
