EQUALIZER
Switching the equalizer on/off
To switch the equalizer on/off,
➮press and hold down the AUDIO button : for longer than two sec- onds.
The equalizer menu appears in the dis- play.
To activate the equalizer,
➮press the softkey 5 assigned to the “USER” or “PRESET” display item and select an equalizer.
To deactivate the equalizer,
➮press the softkey 5 assigned to the “OFF” display item.
Automatically calibrating the equalizer
You can electronically calibrate and store values for three different situations.
EQ 1 for the driver only
EQ 2 for the driver and front passen- ger
EQ 3 for the front and rear occupants
Hold the calibration microphone in the appropriate position whilst calibration is taking place.
The position of the calibration micro- phone for situation 1 (e.g. for the driver alone) is at the height of the driver’s head.
For situation 2, the calibration micro- phone should be positioned between the driver and the front passenger.
For Situation 3, it should be placed at the centre of the vehicle interior (left/ right, front/back).
Really quiet surroundings are required for the calibration. Any extraneous noise will distort the measured values.
Note:
During calibration, the temperature in- side the vehicle must not exceed 55 °C since this could lead to falsified meas- urements.
The sound radiating from the loud- speakers must not be obstructed by any objects. All the loudspeakers must be connected. The microphone must be connected to the device.
The microphone that you need is sup- plied with the Los Angeles MP74. If you have a Seattle MP74, you can obtain the microphone from retailers.
To calibrate an equalizer,
➮press and hold down the AUDIO button : for longer than two sec- onds.
➮Press the softkey 5 assigned to the “USER EQ” display item.
➮Press the softkey 5 assigned to the display item of the equalizer
➮Press the softkey 5 assigned to the “AUTO” display item.
A countdown is shown in the display. Afterwards you will hear a test sound and calibration begins.
Note:
Follow the instructions shown in the dis- play during calibration!
➮Proceed as described for all the equalizers.
34
