Bosch Appliances NBC-265-P operation manual Network and power connector, Network connection

18 en Installation IP Camera 200 Series

3.3Network (and power) connector

1
2
	3
		4
I/O
Line-			DC12V	erne
		out
				t
				Line-
				in

Figure 3.3 Network connection

–Connect the camera to a 10/100 Base-T network.

–Use a shielded UTP Category 5e cable with RJ45 connectors.

–Power can be supplied to the camera via the Ethernet cable compliant with the Power-over-Ethernet

(IEEE 802.3af) standard.

Note:

The camera can accept power from both the DC12V power input and the Ethernet input at the same time. The primary source is the DC12V input. If both are connected and DC power removed, the camera will reboot and will then be powered by PoE. If both are connected and the PoE removed, the camera will continue working.

AR18-10-B012 v1.5 2011.01 Installation and Operation Manual Bosch Security Systems