Bosch Appliances NBC-265-P operation manual Activating and Configuring Storage Media

IP Camera 200 Series Advanced Mode en 53

Note:

If a device had primary and secondary recording running on the SD card and is then added to a VRM system, the blocks used for primary recording will not be re-used, reducing the available recording space for ANR recording. This can be solved by re- formatting the SD card.

Throughput limit for simultaneous recording and local replay at

100% playback speed is:

–maximum total recording bit rate of 7 Mbps for external iSCSI recording.

–maximum total recording bit rate of 10 Mbps for SD card recording, depending on SD card performance.

Activating and Configuring Storage Media

The storage overview displays the available storage media. Select individual media or iSCSI drives and transfer these to the Managed storage media list. Activate the storage media in this list and configure them for storage.

Note:

Each storage medium can only be associated with one user. If a storage medium is already being used by another user, decouple the user and connect the drive to the camera. Before decoupling, make absolutely sure that the previous user no longer needs the storage medium.

1.In the Recording media section, click the iSCSI Media or Local Media tab to display the applicable storage media in the overview.

2.In the Storage overview section, double-click the required storage medium, a SD card, an iSCSI LUN or one of the other available drives. The medium is then added to the Managed storage media list. Newly added media is indicated in the Status column by the status Not active.

3.Click Set to activate all media in the Managed storage media list. These are indicated in the Status column by the status Online.

Bosch Security Systems Installation and Operation Manual AR18-10-B012 v1.5 2011.01