IP Camera 200 Series | Advanced Mode en 77 |
|
|
Relay follows
If required, select a specific event that will trigger the relay. The following events are possible triggers:
–Off: Relay is not triggered by events
–Connection: Trigger whenever a connection is made
–Video alarm %sTrigger by interruption of the video signal
–Motion alarm %sTrigger by motion alarm, as configured on the VCA page
–Local input %sTrigger by the corresponding external alarm input
–Remote input %s: Trigger by remote station's corresponding switching contact (only if a connection exists)
Relay name
The relay can be assigned a name here. The name is shown on the button next to Trigger relay. The LIVEPAGE can also be configured to display the name next to the relay icon. (Do not use any special characters, for example &.)
Trigger relay
Click the button to switch the relay manually (for example, for testing purposes or to operate a door opener).
Bosch Security Systems | Installation and Operation Manual |
