Bosch Appliances XF installation manual Navigation, Setting, Default value, Reset, Contacts

80 en Menu default values							Divar XF
Table 8.3	Configuration menu default values
Navigation					Setting	Default value	Reset
Contacts					Contact Inputs NC	None	Y
					Relay Outputs NC	None	Y
		1..24			Contact input name	Contact input	Y
						1..24
					Profile override mode	No override	Y
					Profile	Profile 1	Y
					Duration	1 hour	Y
Motion		1..16			Trigger level	50%	Y
					Motion areas	All clear	Y
Event		Profile 1-6	General		Auto acknowledge	Disabled	Y
					alarms
					Alarm dwell time	10 seconds	Y
					Beep on alarm	Enabled	Y
					Beep on video loss	Enabled	Y
					Actions when entering	No actions	Y
					profile
			Contact	1...24	Enabled	1..16 enabled	Y
					Alarm	Disabled	Y
					Actions	Apply recording	Y
						for NShow on
						Mon A
			Motion	1...24	Enabled	1..16	Y
					Alarm	Disabled	Y
					Actions	Apply recording
						for NShow on
						Mon A
			Video loss	1...24	Enabled	1..16 enabled	Y
Network		Setup			DVR Name	DIVAR XF	N
					Discovery	Enabled	N
					DHCP	Enabled	N
					IP address	0.0.0.0	N
					Subnet mask	0.0.0.0	N
					Default gateway	0.0.0.0	N
					HTTP port	80	N
					Bandwidth limit	100Mbps	N
		IP range			Begin address	0.0.0.0	N
					End address	255.255.255.25	N
						5
		Monitor streaming			Input 1..16	Camera input	Y
Storage		Status					NA
		Settings			Override after	Disk full set	Y
		Service					NA

F.01U.135.429 2.5 2009.08 Installation manual Bosch Security Systems