Divar XF | Advanced configuration menu en 61 |
|
|
3.Highlight the profiles to copy to (highlight the
4.Select the camera input(s) to be copied from, for the profile to be copied.
5.Select the camera inputs to be copied to (hightlight the
6.Check only those recording modes (Normal, Alarm or Motion) that you wish to copy.
7.Click Copy.
6.5Contacts
Use the Contacts menu to set up alarm inputs and relay outputs.
| Figure 6.6 Contacts menu |
6.5.1 | Contact inputs |
| By default, all contact Inputs are Normally Open (NO). Highlight contact inputs that you wish |
| to function as Normally Closed (NC) contacts (highlight the |
6.5.2 | Relay outputs |
| By default, all relay output contacts are Normally Open (NO). Highlight the relay outputs that |
| you wish to function as Normally Closed (NC) contacts. |
6.5.3 | Contact input properties |
| Each of the 16 contact inputs can be assigned a name and a profile override mode. |
Profile overrides
An alarm input can activate a profile override. There are three modes available:
– No override (default)
– Follows: the profile override lasts for as long as the input is active (no override duration can be set).
Bosch Security Systems | Installation manual | F.01U.135.429 2.5 2009.08 |