Kyocera FS-1128MFP Auto Error Clear, Sys. Menu/Count.a b 4 User/Job Account 5 User Property, Exit

Default Setting (System Menu)

Auto Error Clear

If an error occurs during printing, the print job stops to wait for the next step to be taken by the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time elapses.

The following errors are automatically cleared.

Cannot duplex print on this paper. Send error.

Cannot connect to Authentication Server. Incorrect account ID. Job is canceled.

Job Accounting restriction exceeded. Cannot print. Job Accounting restriction exceeded. Cannot scan. Job not stored. Press [OK].

Job Accounting restriction exceeded. Job is canceled. Sub address/Polling box limit exceeded. Job is canceled. Memory is full. Print job cannot be processed completely. Scanner memory is full. Job is canceled.

Print overrun. KPDL error.

USB memory error. Job is canceled.8 No multi copies. Press [OK].

Auto Error Clear ON/OFF

Select whether to use Auto Error Clear or not.

Use the procedure below to specify the auto error clear setting.

Sys. Menu/Count.:a b

4User/Job Account

5User Property

*********************

[ Exit ]

1In the Sys. Menu/Count. menu, press the U or V key to select [Common Settings].

Common Settings: a b

*********************

2Default Screen

3Sound

[ Exit ]

2Press the OK key. The Common Settings menu appears.

3Press the U or V key to select [Timer Setting], and press the OK key.

OPERATION GUIDE 8-101