Kyocera FS-1028MFP Login User Name L b, Login Password, Menu Login, Exit, Administrator only

Preparation before Use

DHCP Settings

Select whether or not to use the DHCP server. The default setting is On.

Use the procedure below to specify the DHCP setting.

1 Press the System Menu/Counter key on the main unit operation panel.

		When you are performing user management and
Login User Name: L b
		have not logged in, a login screen will appear.
********************		Then, enter the user ID and password to log in.
Login Password:
[ Menu ] [ Login ]		NOTE:
		• Refer to Character Entry Method on Appendix-5for
		details on entering characters.
	• If [Netwk Authentic.] is selected as the user
		authentication method, press [Menu] (the Left
		Select key) to select the authentication destination.

Sys. Menu/Count.: a b

1Report

2Counter

*********************

[ Exit ]

2In the Sys. Menu/Count. menu, press the U or V key to select [System], and then press the OK key.

Administrator only.

System: a b

*********************

2I/F Block Set.

3Security Level

[ Exit ]

IMPORTANT: To make the settings, you must have logged in using a user ID with administrator privileges.

If you have logged in using a user ID without administrator privileges, the screen will display Administrator only. and return to the standby screen.

3In the System menu, press the U or V key to select [Network Setting].

2-18 OPERATION GUIDE