Kyocera FS-1028MFP WSD Scan Setup, AppleTalk Setup, Sys. Menu/Count.a b 1 Report 2 Counter, Exit

Default Setting (System Menu)

Ether-II 802.2 SNAP

8 Press the OK key. Completed. is displayed and the screen returns to the Network Setting menu.

For detailed information on restarting the system, refer to Restarting the System on page 8-127.

AppleTalk Setup

Select the Apple Talk network connection.

Refer to AppleTalk Setup on page 2-22about the procedures.

WSD Scan Setup

Select whether or not to use WSD Scan. The default setting is On.

Use the procedure below to setup the WSD-SCAN setting. The machine must be restarted after the setting is changed.

Sys. Menu/Count.:a b

1Report

2Counter

*********************

[ Exit ]

1In the Sys. Menu/Count. menu, press the U or V key to select [System], and press the OK key.

Login User Name: L b

*******************

Login Password:
[ Menu	] [ Login	]
System:	a	b

*********************

2I/F Block Set.

3Security Level

[ Exit ]

When you are performing user management and have not logged in, a login screen will appear. Then, enter the user ID and password to log in, and press [Login] (the Right Select key).

2The System menu appears.

3Press the U or V key to select [Network Setting].

8-132 OPERATION GUIDE