Kyocera FS-1028MFP, FS-1128MFP manual Special Paper, Appendix-14, Operation Guide

Curl: Most paper naturally tends to curl after the package is opened. When paper passes through the fixing unit, it curls upward slightly. To deliver flat printouts, load the paper so that the curl faces towards the bottom of the paper tray.

Static electricity: During printing, paper is electrostatically charged so that the toner adheres. Choose paper that can be discharged quickly so that copies do not cling together.

Whiteness: Paper whiteness affects print contrast. Use whiter paper for sharper, brighter copies.

Quality: Machine problems may occur if sheet sizes are not uniform or if corners are not square, edges are rough, sheets are uncut, or edges or corners are crushed. In order to prevent these problems, be especially careful when you cut the paper yourself.

Packaging: Choose paper that is properly packaged and stacked in boxes. Ideally, the packaging itself should have been treated with a coating to inhibit moisture.

Specially treated paper: We do not recommend printing onto the following types of paper, even if it conforms to the basic specifications. When you use these kinds of paper, purchase a small amount first as a sample to test.

•Glossy paper

•Watermarked paper

•Paper with an uneven surface

•Perforated paper

Special Paper

This section describes printing onto special paper and print media.

The following paper and media can be used.

•Transparency (OHP film)

•Rough

•Vellum

•Labels

•Recycled

•Preprinted

•Bond

•Cardstock

•Color (Colour)

•Prepunched

•Letterhead

•Envelope

•Thick

•High Quality

•Custom 1 to 8

Appendix-14 OPERATION GUIDE