Kyocera FS-1028MFP Low Power Timer, Timer Setting a b, Sleep Timer 3 PanelReset Timer Exit, 8-108

Default Setting (System Menu)

Timer Setting: a b

*********************

2Sleep Timer

3PanelReset Timer

[ Exit ]

4The Timer Settings menu appears.

PanelReset Timer:D b (5 - 495)

******90*sec.

5Press the U or V key to select [Panel Reset Timer].

6Press the OK key. Panel Reset Timer appears.

7 Press the U or V key to set the Panel Reset Timer. Set the amount of time before resetting the message display on the panel in seconds. You cannot use the numeric keys to enter this value.

8 Press the OK key. Completed. is displayed and the screen returns to the Timer Settings menu.

Low Power Timer

You can specify the amount of time to wait before Low Power Mode.

Specify a value from 1 - 240 minutes (1 minute increments). The default setting is 2 minutes. For more information on Low Power Mode, refer to Auto Low Power Mode on page 3-4.

Use the procedure below to set the Low Power Mode.

Sys. Menu/Count.:a b

4User/Job Account

5User Property

*********************

[ Exit ]

1In the Sys. Menu/Count. menu, press the U or V key to select [Common Settings].

Common Settings: a b

*********************

2Default Screen

3Sound

[ Exit ]

2Press the OK key. The Common Settings menu appears.

3Press the U or V key to select [Timer Setting], and press the OK key.

8-108 OPERATION GUIDE