Kyocera FS-1128MFP Selecting the Multi Purpose Tray, Copying Functions, Category, How to, Sizes

Copying Functions

Selecting the Multi Purpose Tray

Change the paper size and media type.

The available paper sizes and media types are shown in the table below.

Category	Item	How to	Sizes
		Select
Paper	Standard	Select from	Letter, Legal, Statement,	4
Size	Sizes	the standard	Executive, Oficio II, A4, A5,
		size.	A6, B5, B6, Folio and 16K
	Others	Select from	ISO B5, Envelope #10,
		envelope,	Envelope #9, Envelope #6,
		postcard or	Envelope Monarch, Envelope
		the custom	DL, Envelope C5, Hagaki,
		sized	Oufuku Hagaki, Youkei 4,
		originals	Youkei 2 and Custom
	Size	Enter the	Inch models
	Entry	size not	Horizontal: 5.83 to 14.02" (in
		included in	0.01" increments), Vertical: 2.76
		the standard	to 8.50" (in 0.01" increments)
		sizes 1 and
			Metric models
		2**.
			Vertical: 70 to 216 mm (in 1 mm
			increments), Horizontal: 148 to
			356 mm (in 1 mm increments)
Media	Plain, Transparency, Rough, Vellum, Labels, Recycled,
Type	Preprinted***, Bond, Cardstock, Color, Prepunched***,
	Letterhead***, Envelope, Thick, High Quality, Custom 1 to
	8***

*For instructions on how to specify the custom paper size (Custom), refer to Adding a Custom Size and Media Type for Paper to Print on page 8-11.

**The input units can be changed in the System menu. Refer to Switching Unit of Measurement on page 8-27.

***For instructions on how to specify the custom paper types 1 to 8, refer to Paper Weight on page 8-17.

To print on preprinted or prepunched paper or on letterhead, refer to Special Paper Action on page 8-24.

NOTE: You can conveniently select in advance the size and type of paper that will be used often and set them as default (refer to Paper Size and Media Type Setup for Multi Purpose Tray on page 8-15).

Use the procedure below to select the paper size and media type.

1Press the Copy key.

2Place the originals on the platen.

OPERATION GUIDE 4-5