Kyocera FS-1128MFP Changing User Properties, Detail, C b, Account Name, k KyoceramitaOsaka Change

Management

Detail:	C b
Account Name:	6/6

kKyoceramitaOsaka

[ Change ]

Changing User Properties

17Press the Z key to select [Account Name:], press [Change] (the Right Select key), select the account, and then press the OK key.

NOTE: If the user list is for device administrator and the device administrator does not log in, [Change] is not displayed.

18After entering the user information, press the OK key again.

Registered. is displayed and the screen returns to Local User List.

User information can be changed. It can be changed only by a user with administrator privileges.

Use the procedure below to change the user properties.

NOTE: Refer to Character Entry Method on Appendix-5for details on entering characters.

1 Press the System Menu/Counter key on the main unit operation panel.

Sys. Menu/Count.: a b

*********************

5User Property

6Common Settings

[ Exit ]

2 In the Sys. Menu/Count. menu, press the U or V
key to select [User/Job Account], and then press	11
the OK key.

Login User Name L b

*******************

Login Password:

[ Menu ] [ Login ]

3If user login administration is disabled, the user authentication screen appears. Enter your login user name and password and then press [Login]. For this, you need to log in with administrator privileges. Refer to Adding a User on page 11-6for the default login user name and password.

NOTE: If [Netwk Authentic.] is selected as the user authentication method, press [Menu] (the Left Select key) to select the authentication destination.

OPERATION GUIDE 11-9