Kyocera FS-1128MFP Function Menu a b, Collate, Duplex, Exit, Continuous Scan a b, 2 On, 4-15

Copying Functions

Continuous Scan

When a large number of originals cannot be placed in the document processor at one time, the originals can be scanned in separate batches and then copied as one job. With this function, originals are scanned until you press [End Scan] (the Right Select key).

The procedure for making copies using Continuous Scan is explained below.

Function Menu: a b

*********************

2	Collate	T
3	Duplex	T
	[ Exit	]

Continuous Scan: a b

********************

2 On

1	Press the Copy key.
2	Press the Function Menu key. Function Menu	4
	appears.

3Press the U or V key to select [Continuous Scan].

4Press the OK key. Continuous Scan appears.

5Press the U or V key to select [On] and then press the OK key.

Completed. is displayed and the screen returns to the basic screen for copying.

6Place the originals in the document processor or on the platen and press the Start key.

7Place the next original and press the Start key. Repeat these steps to scan the remaining originals.

After scanning all originals, press [End Scan] (the Right Select key) to start copying.

OPERATION GUIDE 4-15