Manuals / Bowflex / Fitness & Sports / Home Gym

Bowflex 001-6961 manual Sport

Models: 001-6961

1 24

Page 24

SPORT

This manual is written and designed by industry professionals. If you have any questions regarding your Bowflex Sport® Home Gym or any instructions found in this manual, please call 1-800-605-3369 for assistance.

Bowflex, Bowflex Sport, Power Rod and the Bowflex and Nautilus logos are either registered trademarks or trademarks of Nautilus, Inc.

Page 24

Image 24

Contents

The Bowflex Sport Home Gym Assembly InstructionsTable of Contents Safety Precautions Get to Know Your Machine Home GymBefore You Assemble Basic Assembly Principles Parts ListAccessory List Get To Know Your MachineHardware Guide Tools You Will NeedAssembly Guide Step 1 - Attach the Lower Lat Tower to the Base PlatformStep 2 - Attach the Base Legs to the Base Platform Step 3 - Attach the Squat Platform to the Main Assembly Assembly GuideCompletely tighten hardware installed during Step Main Assembly Step 4 - Attach the Chest Bar with Pulleys to theStep 5 - Attach the Seat Bracket to the Seat Pad Assembly GuideStep 6 - Attach the Seat Rail to the Seat Assembly Step 7 - Attach the Rear Leg to the Rear Leg Cross TubeAssembly Guide Note See Step 22 to adjust the Seat BracketStep 8 - Attach the Rear Leg to the Seat Rail Assembly GuideAssembly can move freely Rail Pull PinStep 9 - Attach the Seat Rail to the Main Assembly Assembly GuideRail Assembly can move freely Do not over-tighten the hardware from StepAssembly Guide Step 10 - Attach the Leg Extension Pivot TubeDo not over-tighten hardware from Step Step 12 - Attach Leg Cable to the Leg Extension Assembly GuideCompletely tighten hardware installed during Step Note Use a Rubber Mallet to secure the End CapsStep 13 - Assemble the Leg Extension Seat Assembly GuideCompletely tighten hardware installed during Step Rail BracketStep 14 - Attach the Leg Extension Seat to the Main Assembly Step 15 - Attach the Lat Cross Bar to the Upper Lat TowerAssembly Guide Completely tighten hardware installed during StepStep 17 - Attach the Rod Box with Power Rods to the Rod Box Frame Step 16 - Attach the Upper Lat Tower to the LowerAssembly Guide Completely tighten hardware installed during StepAssembly Step 19 - Attach the Faceplate to the MainAssembly Guide From Step 16 - Main AssemblyStep 20 - Attach the Faceplate Back Panels Step 21 - Tighten Lower Bolt on the Seat BracketAssembly Guide Secure the Panels using 2 #10 Phillips Head Screws ItemStep 22 - Attach the Bench to the Seat Assembly Step 23 - Route the Rod CablesAssembly Guide From Step 6 - Seat AssemblyStep 24 - Route the Lat Cables Step 25 - Route the Leg CablesStep 26 - Route the Squat Cables Assembly GuideOFFICES IN THE UNITED STATES INTERNATIONAL OFFICES IMPORTANT CONTACT NUMBERSPage SPORT