24
10/100 Internal Print Server
10/100 Internal PS Features
Table 4 • Menu Options
TCP/IP Configuration
You can change the TCP/IP configuration of the 10/100 Internal PS.
•IP Address: Use this feature to set the IP address if using the Permanent addressing method.
•IP Address Resolution: Use this feature to select the addressing method to use (Dynamic or Permanent).
•Dynamic Protocols: Use this feature to select the Dynamic Addressing method to use at startup. Choices include RARP, BOOTP, DHCP, Gleaning or Default Address.
•Subnet Mask: Use this feature to set the subnet mask. The subnet mask must follow the format XXX.XXX.XXX.XXX, where each XXX is a number between 0 and 255.
•Default Gateway: Use this feature to set the default gateway. This gateway will be used whenever messages need to be sent to another network. This gateway address must follow the format XXX.XXX.XXX.XXX, where each XXX is a number between 0 and 255.
•WINS Server IP Address: Use this feature to set or view the IP address of the WINS Server.
•Connection Timeout Checking: Use this feature to enable or disable the Connection Timeout feature. The timeout is used to close network TCP/IP connections that are idle for more than the number of seconds entered in the Timeout Value.
•Timeout Value (secs): Use this feature to set the Connection Timeout Value. The Valid range is 10 to 3600 seconds. The default is 300 seconds.
•ARP Broadcast Interval (mins): Use this feature to set interval for sending an ARP Broadcast. The valid range is 1 to 30 minutes. Address Resolution Protocol (ARP) broadcast packets allow other network devices to associate the print server's IP Address with its hardware address.
•Base Raw Port Number: Use this feature to set the raw TCP port that the print server will use for printing tasks. The default is port 9100.
Y885775 | BradyConnect 10/100 Internal Print Server User Guide | 07/18/2008 |
