BradyConnect WebView
Alert Setup
9.Enter a valid email address to send the alert messages to.
Example • admin@yourcompany.net (The Port field can be ignored for email setup.)
Important • A password is required. If you forget to enter the password, the alerts you just set are deleted.
10.Click Add Alert Message.
To receive email alert, you must give 10/100 Internal PS the IP address of your mail server that is running SMTP.
11.To save current settings, click Save Printer Setting.
12.Enter the password and click Save Current Configuration.
.
Important • The printer accepts only the last configuration made.
13.You can continue to add more Alerts, if finished:
•From the Printer Home Page, select PrintServer Settings > Network Communications Setup.
•Click SMTP Email Alerts.
•Specify your SMTP server address.
Note • The SMTP Server address might be referred to as Mail Server address.
When these steps are done, you can begin receiving email notification messages.
71
07/18/2008 | BradyConnect 10/100 Internal Print Server User Guide | Y885775 |
