94
Frequently Asked Questions
What if a print job makes it to the queue, but never leaves the queue? The label does not print. These are the things to check:
•Confirm that the printer is turned on and receiving power.
•Confirm that the network cable is plugged in and that you can ping the printer.
•If that does not solve the issue, it is likely that there was a misconfiguration while creating the queue. The queue must be recreated verifying the following:
•Confirm that you use the print server’s valid IP address.
•If you are using a UNIX or AS/400 host, there is an option for the remote queue name. There is only one valid response to use: PORTLF1.
•If Windows does not have LPR installed, the above required option should be left blank.
•See the documentation for other operating system specific queue creation.
What are the minimum requirements to network a printer?
•
•10/100 Internal PS
•Hub or Switch
•If a hub or switch is NOT used, you need a
•Workstation running a TCP stack with print services installed.
What is the default User ID and password for the print server?
• The User ID is admin and the password is 1234.
What ports are open on 10/100 Internal PS and related software?
TCP Ports:
•21 FTP
•23 Telnet
•80 HTTP Server
•515 Printer port
•9100 Raw socket connection
UDP Ports:
•161 SNMP broadcast from 10/100 Internal PS
•162 SNMP trap on BradyConnect Alert
•4201 discovery destination on 10/100 Internal PS
Y885775 | BradyConnect 10/100 Internal Print Server User Guide | 07/18/2008 |
